Shipping today
Home/Polyamide
POLYAMIDE

Polyamide —
cast nylon, PA-6, PA-66

Engineering thermoplastic with high impact resistance, wear resistance, and low friction. Base grade — PA-6 (cast nylon); also PA-66 and filled modifications.

PA-6/PA-66
Grades
110°C
Op. temperature
0.01mm
CNC accuracy
Base
caprolactam
Density
1.14g/cm³
Strength
70-90MPa
Standards
GOST + TU
Grades

Which polyamide you need

Grade choice depends on load, temperature, and operating mode. For general machine building — PA-6; for higher temperatures — PA-66; for sliding supports — filled modifications.

01

PA-6 (cast nylon)

Base grade. Made by polymerization of caprolactam. Good impact resistance, wear resistance, machinability. Gears, bushings, sprockets.

02

PA-66

Stiffer and more heat-resistant than PA-6. Operating temperature up to 110°C. Loaded machinery components.

03

Oil-filled PA

With mineral oil in the matrix — self-lubricating, low friction. Sliding supports, guides, bearings without lubrication.

04

Graphite-filled PA

With graphite or MoS₂ — increased wear resistance and thermal conductivity. Bearings in heavy-duty operating modes.

Applications

Where polyamide works

  • →Gears, sprockets, worm-gear pairs
  • →Sliding bushings, bearings, guides
  • →Rollers, pulleys, conveyor-system components
  • →Seals, cuffs, packing rings
  • →Machine housing parts, insulation elements
Catalog

Where to see PA-6

PA-6 is in stock under the "Cast Nylon" brand. Rods, sheets, bushings in standard sizes. Other PA-66 grades and filled modifications — we manufacture to order.

Inquiry

Order a polyamide part

We machine to client drawing: bushings, gears, rollers, complex parts from PA-6, PA-66, oil-filled, and graphite-filled polyamide. Tolerance down to 0.01 mm on CNC mills.

Minimum batch — 1 piece. Time from inquiry to shipping — from 3 business days.

INQUIRY

Need a size
not in the catalog?

Send us a drawing — we'll respond with a quote in 24 hours. We work with batches from 1 piece.