CNC turning of parts from electrical-insulation materials
We turn bushings, rings, washers, cylindrical flanges, rods, axles, studs, and other bodies of revolution to customer drawings.
Precision — up to 0.01 mm on diameters and individual fit dimensions where the material, part size, and drawing requirements allow. Concentricity and end-face parameters are verified against documentation.
What CNC turning provides
Turning suits parts with outer and inner diameters, end faces, grooves, chamfers, and threads. The method is used where fit diameters, concentricity of bore and outer surface, and perpendicularity of end faces are critical.
The part is machined by CNC program and inspected with measuring tools. Batch repeatability depends on material, blank, tooling, and drawing requirements.
Which parts it suits
| Part type | Why turning is chosen |
|---|---|
| Bushings | Inner and outer diameter, concentricity, end faces |
| Rings | Diameters, height, end-face flatness |
| Washers | Bore, outer diameter, thickness |
| Cylindrical flanges | Diameter, end faces, holes after an additional operation |
| Rods and axles | Diameter, length, chamfers |
| Studs and nuts | Thread, thread bore diameter, end faces |
Technical parameters
| Parameter | Value |
|---|---|
| Method | CNC turning |
| Tolerance | Up to 0.01 mm on selected dimensions after drawing review |
| Maximum workpiece diameter | [to be specified] |
Materials for turning
We machine materials in rods, tubes, and prepared blanks: glass-textolite STEF and EPGC, textolite A, B, PT, PTK, PTFE F-4, cast nylon PA-6 and PA-6-MO, polycarbonate, polypropylene.
For antifriction parts we usually consider cast nylon and textolite. For chemically resistant parts — PTFE. For electrical-insulation bushings and rings — glass-textolite and EPGC. The final choice depends on load, temperature, environment, and drawing requirements.
Quality control
- outer and inner diameters;
- coaxiality of outer and inner surfaces, if specified in the drawing;
- perpendicularity of end faces;
- thread inspected with a gauge or other agreed method;
- surface and edge quality.
Send drawing for a quote
If marked as urgent, we reply within 6 hours during business hours. If you submitted after 5 pm, the quote comes in the morning.